piwik image

Dwyer® 2003 IDM2003 | MKS Pipe and Valve
Dwyer® 2003 IDM2003
Print this page Send this pageSend this Page
  1. pin-int

Dwyer® 2003 IDM2003

Dwyer® MAGNEHELIC® 2000 Series 2003 Differential Pressure Gauge, 0 to 3 in-WC, 4 in Dia Dial, 1/8 in, 1 % Accuracy, Die-Cast Aluminum

  • Brand Name: Dwyer®
  • Manufacturers: Dwyer Instruments
  • MKSPN: IDM2003
  • MPN: 2003
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Select the Series 2000 MAGNEHELIC® differential pressure gauges for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer's simple, frictionless MAGNEHELIC® gage movement, it quickly indicates air or non-corrosive gas pressures either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weather-proof to IP67.

Dwyer® Differential Pressure Gauge, 20 to 140 deg F, 4 in Dial Diameter, Die-Cast Aluminum, 2000 Series, 1/8 in Connection, 1 % Accuracy, FNPT Connection, 0 to 3 in-WC Pressure, Gray, 4-3/4 in Dia

Accuracy      :      1 %
Color      :      Gray
Connection Size      :      1/8 in
Connection Type      :      FNPT
Dial Diameter      :      4 in
Dimensions      :      4-3/4 in Dia
Material      :      Die-Cast Aluminum
Pressure Range      :      0 to 3 in-WC
Series      :      2000 Series
Temperature Rating      :      20 to 140 deg F
  • Easy to read gage through undistorted plastic face permits viewing from far away
  • Patented design provides quick response to pressure changes means no delay in assessing critical situations
  • Durable and rugged housing and high quality components combine to provide long service life and minimized down-time
  • Bezel provides flange for flush-mounting in panel
  • Clear plastic face is highly-resistant to breakage
  • Precision litho-printed scale is accurate and easy to read
  • Red tipped pointer of heat treated aluminum tubing is easy to see
  • Pointer stops of molded rubber prevent pointer over travel without damage
  • Wishbone assembly provides mounting for helix, helix bearings and pointer shaft
  • Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix
  • Motion damped with high viscosity silicone fluid
  • Zero adjustment screw is conveniently located in the plastic cover and is accessible without removing the cover
  • O-ring seal provides pressure tightness
  • Helix is precision made from an alloy of high magnetic permeability
  • Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale
  • Calibrated range spring is flat spring steel
  • Small amplitude of motion assures consistency and long life
  • It reacts to pressure on diaphragm
  • Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates
  • It is locked and sealed in position with a sealing plate and retaining ring
  • pdfInstruction/Installation Manual https://www.mkspvf.com//ASSETS/DOCUMENTS/ITEMS/EN/Dwyer_2003_Instruction_Installation_Manual.pdf
  • pdfSpecification Sheet https://www.mkspvf.com//ASSETS/DOCUMENTS/ITEMS/EN/Dwyer_2003_Specification_Sheet.pdf
  • pdfSubmittal https://www.mkspvf.com//ASSETS/DOCUMENTS/ITEMS/EN/Dwyer_2003_Submittal.pdf