piwik image

Bell & Gossett 401536 T17C | MKS Pipe and Valve

Bell & Gossett 401536 T17C

Bell & Gossett 401536 Angle Thermostatic Steam Trap, 1/2 in, NPT, 25 psi, Brass

  • Brand Name: Bell & Gossett
  • Manufacturers: Xylem
  • MKSPN: T17C
  • MPN: 401536
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Thermostatic steam traps reduce start-up times and improve overall efficiency. Balanced Pressure Thermostatic Traps use a special bellows diaphragm. The diaphragm is designed to open in response to pressure and temperature to discharge air and condensate, and to close against passage of steam. The temperature at which a Thermostatic Trap opens is variable, but is 10 to 30 deg F below saturated steam temperature for the existing pressure. This type of trap is small, simple in construction, size and weight, and has adequate capacity for various applications, especially in low-pressure heating systems.

Bell & Gossett Thermostatic Steam Trap, Angle, Model 17C-A 2-25, 1/2 in Nominal Size, NPT, 25 psi, Brass

  • Thermostatic traps are normally open allowing fast venting of air during start-up
  • During start-up, cold condensate drains through the trap, as temperatures reach 10 to 30 deg F of saturation, the thermostatic bellows element closes the trap
  • During operation, thermostatic traps find an equilibrium point to drain condensate approximately 10 deg to 30 deg F below saturation at continuous flow
  • Sub-cools condensate usually 10 deg to 30 deg F
  • Normally open at start-up to provide fast air venting
  • Follows steam saturation curve to operate over wide range of conditions
  • Self-draining
  • Energy efficient
  • Fast response to changing conditions
  • Fail mode is open
  • Water hammer can damage bellows
  • Superheat can damage bellows if it exceeds trap temperature rating
  • Cooling leg required in some applications
  • Brass bodies provide resistance to moderate water hammer and chemical attack
  • Stainless steel Dura-Stata modules are easily replaced without disturbing piping connections
  • Compact size reduces installation space requirements
  • Inexpensive purchase price
  • Range of seat pressures available up to 125 psig
  • Balanced pressure
  • Model 17C-A 2-25